Pages

▼

Tuesday, February 27, 2018

Make a Laptop Wall Mount with Articulating Arm

I made a wall mount for my 17" HP laptop.  It has an articulating arm for a wide range of motion for positioning the laptop.  Watch the video below and if you would like to make one too, click here to download the PDF plan.


I made this wall mount using some scrap maple, walnut, and Baltic birch.  It is nice to have a dedicated place for my laptop in the workshop when running the CNC machine or just watching YouTube videos.

DIY Laptop Wall Mount with Articulating Arm

The hardware is readily available at the big box store.  All of the details about the hardware I used are in the PDF plan.

Laptop Wall Mount

This wall mount is perfect for my 17" laptop that weighs about six pounds.  If you will be mounting a larger or heavier laptop, I suggest making a more beefy mounting arm.

Laptop Articulating Arm







at

12 comments:

  1. UnknownFebruary 27, 2018 at 8:14 PM

    Thank you so much.

    ReplyDelete
  2. A friend in St PaulMarch 3, 2018 at 10:15 AM

    Very interesting project. I think you did a great job. As a hobby woodworker who makes his share of mistakes in the shop it's nice to see a pro like yourself sharing your's. Finally, IMHO your correct with walnut and maple making for a beautiful look. Congrats on a fine video.

    ReplyDelete
    Replies
    1. The Carmichael WorkshopMarch 4, 2018 at 9:51 AM

      Thank you very much! Hello St. Paul! I had a gut feeling about that piece breaking. There's always a way to fix mistakes, and usually it's an improvement.

      Delete
  3. Linda McMarch 4, 2018 at 9:38 AM

    Looks great! very functional as well as beautiful

    ReplyDelete
    Replies
    1. The Carmichael WorkshopMarch 4, 2018 at 9:51 AM

      Thank you very much Linda! I used the computer a lot yesterday and it is holding up fine.

      Delete
  4. FlipsawMarch 5, 2018 at 3:09 PM

    Thanks Steve for the helpful plans.

    ReplyDelete
  5. FlipsawMarch 5, 2018 at 3:10 PM

    Thanks so much Steve for the plans. Nice job!

    ReplyDelete
  6. UnknownMarch 5, 2018 at 7:26 PM

    soy colombiano te felicito por tu trabajo realizare uno de estos muy pronto.

    ReplyDelete
  7. UnknownMarch 5, 2018 at 7:27 PM

    felicitaciones muy buen trabajo realizare el proyecto pronto.

    ReplyDelete
  8. UnknownMarch 19, 2018 at 12:15 AM

    Will use this for my Amateur Radio Shack Laptop. No need for a desk!
    Regards from the Dominican Republic.

    ReplyDelete
  9. UnknownAugust 30, 2018 at 11:16 PM

    Thanks you, amazing project!

    ReplyDelete

Note: Only a member of this blog may post a comment.