Make a 3D Printer Enclosure for a Prusa i3 RepRap 3D Printer!

I made an enclosure for my Folger Tech Prusa i3 RepRap 3D Printer to protect it from sawdust in the shop.  This project is specific to my 3D printer, but I hope it gives you some ideas on how to build an enclosure or display case for other items as well.

I used a combination of 3/4" plywood, 1/2" plywood, 1/4" plywood, and 1/4" plexiglass for this project.  I had all of the materials on-hand left over from other projects.  Below are the dimensions for the main parts.

• Top and Bottom - 18" wide x 22.75" deep (3/4" plywood)
• Sides - 23" wide x 22" tall (1/2" plywood)
• Back - 18" x 18" (1/4" plywood)
• Control Panel Cover - 18" wide x 4.25" tall (3/4" plywood)

Building the small box for the 3D printer controls was a blast.  I made careful measurements and designed it myself.  I cut all the parts from 1/4" plywood and glued them together with wood glue.  I used this On/Off Lighted Rocker Switch for the printer and LED lights.  If you have the same controller, click here to download my PDF template of the controller box.

This was a fun project and a great opportunity to use up some plywood and plexiglass materials that were taking up space in my shop.  Look out for a 3D printed project coming soon!